AdelaideBBS.com_阿德莱德中文网_南澳华人论坛_阿德莱德租房_工作_交友_同城 AdelaideBBS.com中文网

标题: 有修马桶的朋友吗? [打印本页]

作者: stone    时间: 19-5-2013 18:55
标题: 有修马桶的朋友吗?
家里的马桶存不了水,一直细细的流,所以只有直接关了水开关。

论坛有这方面的师傅吗? 价格大概多少?

还有厨房的水龙头,小滴水,维修多少钱。

站内联系,谢谢啦!

作者: Pyree    时间: 19-5-2013 19:06
本帖最后由 Pyree 于 2013-5-19 18:39 编辑

You just need to replace the washer. You can do that DIY for very cheap.
作者: stone    时间: 20-5-2013 10:26
ding
作者: jasonadelaide    时间: 20-5-2013 10:28
家政服务 生活帮忙里有很多师傅
作者: Bruce0411    时间: 20-5-2013 21:22
Ddddddddddddddddddddddddddddddddddd
作者: Bruce0411    时间: 20-5-2013 21:22
Dddddddddddddddddddddddddddddddddddddd
作者: Bruce0411    时间: 20-5-2013 21:23
Dddddddddddddddddddddddddddddddddddddddddddd
作者: Bruce0411    时间: 20-5-2013 21:23
Ddddddddddddddddddddddddddddddddddddddddddd
作者: Bruce0411    时间: 20-5-2013 21:24
Ddddddddddddddddddddddddddd
作者: 六巷的双双    时间: 22-5-2013 00:51
马桶盖打开,里面有个调节浮漂位置的螺丝,自己调一下就可以了,
作者: stone    时间: 22-5-2013 10:10
六巷的双双 发表于 2013-5-22 01:21
马桶盖打开,里面有个调节浮漂位置的螺丝,自己调一下就可以了,

试过了,不行。
作者: fan2706    时间: 22-5-2013 12:58

作者: Pyree    时间: 22-5-2013 17:11
本帖最后由 Pyree 于 2013-5-22 16:59 编辑

If your toilet water tank is not holding water and water is leaking down to the toilet bowl, you need to replace the flush valve washer!!! For example:

http://www.youtube.com/watch?v=yoYR7-SW8dQ

Watch the video.
Turn off your water.
Open your toilet tank.
Unscrew the flush mechanism.
Take the flush valve washer off.
Bring the washer to Bunnings.
Buy a replacement.
But the new washer back on the flush mechanis.
Screw the flush mechanism back.
Close the lid to the toilet tank.
Done!!!

Leaky taps:

Usually you open the tap on where you turn it and replace something like this inside



Easy job. Basic skill for a man. Why does it take so long to fix?!

作者: stone    时间: 22-5-2013 17:57
Pyree 发表于 2013-5-22 17:41
If your toilet water tank is not holding water and water is leaking down to the toilet bowl, you nee ...

Thanks................




欢迎光临 AdelaideBBS.com_阿德莱德中文网_南澳华人论坛_阿德莱德租房_工作_交友_同城 AdelaideBBS.com中文网 (http://baiyumei.com/bbs/) Powered by Discuz! X3.2